Contact Us!

 

 

 

 

 

 


 
Welcome To Chicago Safety Institute!
Tell what you need we are here to serve you. (800) 275-8239

 DOL 29 CFR 1926  - OSHA 30 Hour for Construction

Training Guidelines

 

 


THE LEADER THE REST WILL FOLLOW!

Objectives

1. Demonstrate Knowledge of OSHA Construction Safety and Health Requirements (or know how and where to research them); meet OSHA's new 2009 guidelines for training and times

2. Define advanced construction safety terms;

3. Identify the most serious hazards associated with the construction environment;

4.  Undertake feasible and practical methods of hazard abatement.

5. Understand the OSHA 29 CFR 1926 rule to implement the OSHAct on construction sites.


Tentative Table Of Contents

 
 This program is designed to give a comprehensive understanding of OSHA Construction Regulations.
Some fatal facts and other materials are handed out.  Regulation books are cost plus.
  OSHA Introduction /  All about OSHA
  Struck by, Caught by /caught between  Hazards
1926 Subpart A - General
  1926.1 - Purpose and scope.
  1926.2 - Variances from safety and health standards.
  1926.3 - Inspections - right of entry.
    1926.4 - Rules of practice for administrative adjudications for enforcement of safety and health standards.
  1926.5 - OMB control numbers under the Paperwork Reduction Act.
1926 Subpart B - General Interpretations
  1926.10 - Scope of subpart.
  1926.11 - Coverage under section 103 of the act distinguished.
  1926.12 - Reorganization Plan No. 14 of 1950.
  1926.13 - Interpretation of statutory terms.
  1926.14 - Federal contract for "mixed" types of performance.
    1926.15 - Relationship to the Service Contract Act; Walsh-Healey Public Contracts Act.
  1926.16 - Rules of construction.
1926 Subpart C - General Safety and Health Provisions
  1926.20 - General safety and health provisions.
  1926.21 - Safety training and education.
  1926.22 - Recording and reporting of injuries.
  1926.23 - First aid and medical attention.
  1926.24 - Fire protection and prevention.
  1926.25 - Housekeeping.
  1926.26 - Illumination.
  1926.27 - Sanitation.
  1926.28 - Personal protective equipment.
  1926.29 - Acceptable certifications.
  1926.30 - Shipbuilding and ship repairing.
  1926.31 - Incorporation by reference.
  1926.32 - Definitions.
  1926.33 - Access to employee exposure and medical records.
  1926.34 - Means of egress.
  1926.35 - Employee emergency action plans.
1926 Subpart D - Occupational Health and Environmental Controls
  1926.50 - Medical services and first aid.
    1926.50 App A - Medical services and first aid.
  1926.51 - Sanitation.
  1926.52 - Occupational noise exposure.
  1926.53 - Ionizing radiation.
  1926.54 - Nonionizing radiation.
  1926.55 - Gases, vapors, fumes, dusts, and mists.
    1926.55 App A - Gases, vapors, fumes, dusts, and mists.
  1926.56 - Illumination.
  1926.57 - Ventilation.
  1926.58 - [Reserved]
  1926.59 - Hazard Communication.
  1926.60 - Methylenedianiline.
    1926.60 App A - Substance Data Sheet, for 4-4'-METHYLENEDIANILINE
    1926.60 App B - Substance Technical Guidelines, MDA
    1926.60 App C - Medical Surveillance Guidelines for MDA
    1926.60 App D - Sampling and Analytical Methods for MDA Monitoring and Measurement Procedures
    1926.60 App E - Qualitative and Quantitative Fit Testing Procedures.
  1926.61 - Retention of DOT markings, placards and labels.
  1926.62 - Lead
    1926.62 App A - Substance Data Sheet for Occupational Exposure to Lead
    1926.62 App B - Employee Standard Summary
    1926.62 App C - Medical Surveillance Guidelines
    1926.62 App D - Qualitative and Quantitative Fit Test Protocols
  1926.64 - Process safety management of highly hazardous chemicals.
    1926.64 App A - List of Highly Hazardous Chemicals, Toxics and Reactives (Mandatory)
    1926.64 App B - Block Flow Diagram and Simplified Process Flow Diagram (Nonmandatory)
    1926.64 App C - Compliance Guidelines and Recommendations for Process Safety Management (Nonmandatory)
    1926.64 App D - Sources of Further Information (Nonmandatory)
  1926.65 - Hazardous waste operations and emergency response.
    1926.65 App A - Personal Protective Equipment Test Methods
    1926.65 App B - General Description and Discussion of the Levels of Protection and Protective Gear
    1926.65 App C - Compliance Guidelines
    1926.65 App D - References
    1926.65 App E - Training Curriculum Guidelines - Non-mandatory
  1926.66 - Criteria for design and construction of spray booths.
1926 Subpart E - Personal Protective and Life Saving Equipment
  1926.95 - Criteria for personal protective equipment.
  1926.96 - Occupational foot protection.
  1926.97 - [Reserved]
  1926.98 - [Reserved]
  1926.99 - [Reserved]
  1926.100 - Head protection.
  1926.101 - Hearing protection.
  1926.102 - Eye and face protection.
  1926.103 - Respiratory protection.
  1926.104 - Safety belts, lifelines, and lanyards.
  1926.105 - Safety nets.
  1926.106 - Working over or near water.
  1926.107 - Definitions applicable to this subpart.
1926 Subpart F - Fire Protection and Prevention
  1926.150 - Fire protection.
  1926.151 - Fire prevention
  1926.152 - Flammable and combustible liquids.
  1926.153 - Liquefied petroleum gas (LP-Gas).
  1926.154 - Temporary heating devices.
  1926.155 - Definitions applicable to this subpart.
  1926.156 - Fixed extinguishing systems, general.
  1926.157 - Fixed extinguishing systems, gaseous agent.
  1926.158 - Fire detection systems.
  1926.159 - Employer alarm systems.
1926 Subpart G - Signs, Signals, and Barricades
  1926.200 - Accident prevention signs and tags.
  1926.201 - Signaling.
  1926.202 - Barricades.
  1926.203 - Definitions applicable to this subpart.
1926 Subpart H - Materials Handling, Storage, Use, and Disposal
  1926.250 - General requirements for storage.
  1926.251 - Rigging equipment for material handling.
  1926.252 - Disposal of waste materials.
1926 Subpart I - Tools - Hand and Power
  1926.300 - General requirements.
  1926.301 - Hand tools.
  1926.302 - Power-operated hand tools.
  1926.303 - Abrasive wheels and tools.
  1926.304 - Woodworking tools.
  1926.305 - Jacks-lever and ratchet, screw, and hydraulic.
  1926.306 - Air receivers.
  1926.307 - Mechanical power-transmission apparatus.
1926 Subpart J - Welding and Cutting
  1926.350 - Gas welding and cutting.
  1926.351 - Arc welding and cutting.
  1926.352 - Fire prevention.
  1926.353 - Ventilation and protection in welding, cutting, and heating.
  1926.354 - Welding, cutting, and heating in way of preservative coatings.
1926 Subpart K - Electrical
  1926.400 - Introduction.
  1926.401 - [Reserved]
  1926.402 - Applicability.
  1926.403 - General requirements.
  1926.404 - Wiring design and protection.
  1926.405 - Wiring methods, components, and equipment for general use.
  1926.406 - Specific purpose equipment and installations.
  1926.407 - Hazardous (classified) locations.
  1926.408 - Special systems.
  1926.416 - General requirements.
  1926.417 - Lockout and tagging of circuits.
  1926.431 - Maintenance of equipment.
  1926.432 - Environmental deterioration of equipment.
  1926.441 - Batteries and battery charging.
  1926.449 - Definitions applicable to this subpart.
1926 Subpart L - Scaffolds
  1926.450 - Scope, application and definitions applicable to this subpart.
  1926.451 - General requirements.
  1926.452 - Additional requirements applicable to specific types of scaffolds.
  1926.453 - Aerial lifts.
  1926.454 - Training requirements.
  1926 Subpart L App A - Scaffold Specifications
    1926 Subpart L App B - Criteria for Determining the Feasibility of Providing Safe Access and Fall Protection for Scaffold Erectors and Dismantlers
  1926 Subpart L App C - List of National Consensus Standards.
    1926 Subpart L App D - List of Training Topics for Scaffold Erectors and Dismantlers.
  1926 Subpart L App E - Drawings and Illustrations.
1926 Subpart M - Fall Protection
  1926.500 - Scope, application, and definitions applicable to this subpart.
  1926.501 - Duty to have fall protection.
  1926.502 - Fall protection systems criteria and practices.
  1926.503 - Training requirements.
    1926 Subpart M App A - Determining Roof Widths - Non-mandatory Guidelines for Complying with 1926.501(b)(10)
    1926 Subpart M App B - Guardrail Systems - Non-Mandatory Guidelines for Complying with 1926.502(b)
    1926 Subpart M App C - Personal Fall Arrest Systems - Non-Mandatory Guidelines for Complying with 1926.502(d)
    1926 Subpart M App D - Positioning Device Systems - Non-Mandatory Guidelines for Complying with 1926.502(e)
    1926 Subpart M App E - Sample Fall Protection Plan - Non-Mandatory Guidelines for Complying with 1926.502(k)
1926 Subpart N - Cranes, Derricks, Hoists, Elevators, and Conveyors
  1926.550 - Cranes and derricks.
  1926.551 - Helicopters.
  1926.552 - Material hoists, personnel hoists, and elevators.
  1926.553 - Base-mounted drum hoists.
  1926.554 - Overhead hoists.
  1926.555 - Conveyors.
  1926.556 - Aerial lifts.
1926 Subpart O - Motor Vehicles, Mechanized Equipment, and Marine Operations
  1926.600 - Equipment.
  1926.601 - Motor vehicles.
  1926.602 - Material handling equipment.
  1926.603 - Pile driving equipment.
  1926.604 - Site clearing.
  1926.605 - Marine operations and equipment.
  1926.606 - Definitions applicable to this subpart.
1926 Subpart P - Excavations
  1926.650 - Scope, application, and definitions applicable to this subpart.
  1926.651 - Specific Excavation Requirements.
  1926.652 - Requirements for protective systems.
  1926 Subpart P App A - Soil Classification
  1926 Subpart P App B - Sloping and Benching
  1926 Subpart P App C - Timber Shoring for Trenches
  1926 Subpart P App D - Aluminum Hydraulic Shoring for Trenches
  1926 Subpart P App E - Alternatives to Timber Shoring
  1926 Subpart P App F - Selection of Protective Systems
1926 Subpart Q - Concrete and Masonry Construction
  1926.700 - Scope, application, and definitions applicable to this subpart.
  1926.701 - General requirements
  1926.702 - Requirements for equipment and tools.
  1926.703 - Requirements for cast-in-place Concrete.
    1926.703 App - General Requirements for Formwork
  1926.704 - Requirements for precast concrete.
  1926.705 - Requirements for lift-slab operations.
    1926.705 App - Lift Slab Operations
  1926.706 - Requirements for masonry construction.
  1926 Subpart Q App A - References to Subpart Q of Part 1926
1926 Subpart R - Steel Erection
  1926.750 - Scope.
  1926.751 - Definitions.
  1926.752 - Site layout, site-specific erection plan and construction sequence.
  1926.753 - Hoisting and rigging.
  1926.754 - Structural steel assembly.
  1926.755 - Column anchorage.
  1926.756 - Beams and columns.
  1926.757 - Open web steel joists.
  1926.758 - Systems-engineered metal buildings.
  1926.759 - Falling object protection.
  1926.760 - Fall protection.
  1926.761 - Training.
    1926 Subpart R App A - Guidelines for establishing the components of a site-specific erection plan: Non-Mandatory Guidelines for Complying with 1926.752(e).
    1926 Subpart R App B - Acceptable test methods for testing slip-resistance of walking/working surfaces: Non-Mandatory Guidelines for Complying with 1926.754(c)(3).
    1926 Subpart R App C - Illustrations of Bridging Terminus Points: Non-Mandatory Guidlines for Complying with 1926.757(a)(10) and 1926.757(c)(5).
    1926 Subpart R App D - Illustration of the Use of Control Lines to Demarcate Controlled Decking Zones (CDZs): Non-mandatory Guidelines for Complying with 1926.760(c)(3).
    1926 Subpart R App E - Training: Non-mandatory Guidelines for Complying with 1926.761.
    1926 Subpart R App F - Perimeter Columns: Non-Mandatory Guidelines for Complying with 1926.756(e) To Protect the Unprotected Side or Edge of a Walking/Working Surface.
    1926 Subpart R App G - 1926.502 (b)-(e) Fall Protection Systems Criteria and Practices.
    1926 Subpart R App H - Double Connections: Illustration of a Clipped End Connection and a Staggered Connection: Non-Mandatory Guidelines for Complying with 1926.756(c)(1).
  1926 Subpart S - Underground Construction, Caissons, Cofferdams, and Compressed Air
  1926.800 - Underground Construction
  1926.801 - Caissons.
  1926.802 - Cofferdams.
  1926.803 - Compressed air.
  1926.804 - Definitions applicable to this subpart.
  1926 Subpart S App A - Decompression Tables
1926 Subpart T - Demolition
  1926.850 - Preparatory operations.
  1926.851 - Stairs, passageways, and ladders.
  1926.852 - Chutes.
  1926.853 - Removal of materials through floor openings.
  1926.854 - Removal of walls, masonry sections, and chimneys.
  1926.855 - Manual removal of floors.
  1926.856 - Removal of walls, floors, and material with equipment.
  1926.857 - Storage.
  1926.858 - Removal of steel construction.
  1926.859 - Mechanical demolition.
  1926.860 - Selective demolition by explosives.
1926 Subpart U - Blasting and the Use of Explosives
  1926.900 - General provisions.
  1926.901 - Blaster qualifications.
  1926.902 - Surface transportation of explosives.
  1926.903 - Underground transportation of explosives.
  1926.904 - Storage of explosives and blasting agents.
  1926.905 - Loading of explosives or blasting agents.
  1926.906 - Initiation of explosive charges-electric blasting.
  1926.907 - Use of safety fuse.
  1926.908 - Use of detonating cord.
  1926.909 - Firing the blast.
  1926.910 - Inspection after blasting.
  1926.911 - Misfires.
  1926.912 - Underwater blasting.
  1926.913 - Blasting in excavation work under compressed air.
  1926.914 - Definitions applicable to this subpart.
1926 Subpart V - Power Transmission and Distribution
  1926.950 - General requirements.
  1926.951 - Tools and protective equipment.
  1926.952 - Mechanical equipment.
  1926.953 - Material handling.
  1926.954 - Grounding for protection of employees.
  1926.955 - Overhead lines.
  1926.956 - Underground lines.
  1926.957 - Construction in energized substations.
  1926.958 - External load helicopters.
  1926.959 - Lineman's body belts, safety straps, and lanyards.
  1926.960 - Definitions applicable to this subpart.
1926 Subpart W - Rollover Protective Structures; Overhead Protection
    1926.1000 - Rollover protective structures (ROPS) for material handling equipment.
    1926.1001 - Minimum performance criteria for rollover protective structures for designated scrapers, loaders, dozers, graders, and crawler tractors.
    1926.1002 - Protective frames (roll-over protective structures, known as ROPS) for wheel-type agricultural and industrial tractors used in construction.
    1926.1003 - Overhead protection for operators of agricultural and industrial tractors.
1926 Subpart X - Ladders
  1926.1050 - Scope, application, and definitions applicable to this subpart.
  1926.1051 - General requirements.
  1926.1052 - Stairways.
  1926.1053 - Ladders.
  1926.1060 - Training requirements.
  1926 Subpart X App A - Ladders
1926 Subpart Y - Commercial Diving Operations
  1926.1071 - Scope and application.
  1926.1072 - Definitions
  1926.1076 - Qualifications of dive team.
  1926.1080 - Safe practices manual.
  1926.1081 - Pre-dive procedures.
  1926.1082 - Procedures during dive.
  1926.1083 - Post-dive procedures.
  1926.1084 - SCUBA diving.
  1926.1085 - Surface-supplied air diving.
  1926.1086 - Mixed-gas diving.
  1926.1087 - Liveboating.
  1926.1090 - Equipment.
  1926.1091 - Recordkeeping requirements.
  1926.1092 - Effective date.
    1926 Subpart Y App A - Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions
  1926 Subpart Y App B - Guidelines for Scientific Diving
1926 Subpart Z - Toxic and Hazardous Substances
 
  1926.1101 - Asbestos
    1926.1101 App A - OSHA Reference Method - Mandatory
    1926.1101 App B - Sampling and Analysis - Non-mandatory
    1926.1101 App C - Qualitative and quantitative fit testing procedures - Mandatory
    1926.1101 App D - Medical questionnaires; mandatory
    1926.1101 App E - Interpretation and classification of chest roentgenograms - mandatory
    1926.1101 App F - Work practices and engineering controls for Class I Asbestos Operations - non-mandatory
    1926.1101 App G - [Reserved]
    1926.1101 App H - Substance Technical Information for Asbestos - Non-Mandatory
    1926.1101 App I - Medical surveillance guidelines for asbestos, non-mandatory
    1926.1101 App J - Smoking cessation program information for asbestos, non-mandatory
    1926.1101 App K - Polarized Light Microscopy of Asbestos - Non-Mandatory
  1926.1102 - Coal tar pitch volatiles; interpretation of term.
  1926.1103 - 13 Carcinogens (4-Nitrobiphenyl, etc.).
  1926.1104 - alpha-Naphthylamine.
  1926.1105 - [Reserved]
  1926.1106 - Methyl chloromethyl ether.
  1926.1107 - 3,3'-Dichlorobenzidine (and its salts).
  1926.1108 - bis-Chloromethyl ether.
  1926.1109 - beta-Naphthylamine.
  1926.1110 - Benzidine.
  1926.1111 - 4-Aminodiphenyl.
  1926.1112 - Ethyleneimine.
  1926.1113 - beta-Propiolactone.
  1926.1114 - 2-Acetylaminofluorene.
  1926.1115 - 4-Dimethylaminoazobenzene.
  1926.1116 - N-Nitrosodimethylamine.
  1926.1117 - Vinyl chloride.
  1926.1118 - Inorganic arsenic.
  1926.1127 - Cadmium
    1926.1127 App A - Substance Safety Data Sheet - Cadmium
    1926.1127 App B - Substance Technical Guidelines for Cadmium
    1926.1127 App C - Qualitative and Quantitative Fit Testing Procedures
    1926.1127 App D - Occupational Health History Interview With Reference to Cadmium Exposure
    1926.1127 App E - Cadmium in Workplace Atmospheres
    1926.1127 App F - Nonmandatory Protocol for Biological Monitoring
  1926.1128 - Benzene.
  1926.1129 - Coke oven emissions.
  1926.1144 - 1,2-dibromo-3-chloropropane.
    1926.1145 - Acrylonitrile.
    1926.1147 - Ethylene oxide
    1926.1148 - Formaldehyde.
    1926.1152 - Methylene Chloride.
    1926 Subpart Z App A - Designations for General Industry Standards Incorporated Into Body of Construction Standards

 

 


 




WWW.SUPERSAFETY.COM Is proud to be a sponsor of The Chicago Safety Institute.

Call us (800) 275-8239

 
HOME

TOP

 
Industrial | Consumer | Safety Forum | CSI | About us | Contact us | Help

Copyright 2013 - 2014
The Chicago Safety Institute�