|
Tychem® LV garments are
available in Level B configuration.
Contact Operators standing by at
(800) 275-8239 for more details on this product.
Sizes available up to 5XL at additional cost; contact
www.supersafety.com for details
|
Tychem®
LV
Physical Properties |
|
Basis Weight (oz/yd2) |
6.6
(ASTM D3776 |
|
Thickness (mils) |
16(ASTM
D1777) |
|
Ball Burst (lbf) |
90 (ASTM D3787-89) |
|
Grab Tensile (lbf) |
42/45 (ASTM D5034) |
|
Trap Tear, (lbf) |
19/19 (ASTM D5597) |
|
MD/CD |
|
|
Chemical Protection and Enhanced
Flexibility
Handling hazardous chemicals
is a dangerous business. You need the most protection
possible. That's where Tychem® LV fits in. Providing
extensive protection, Tychem® LV is supported with a broad
range of barrier documentation. In fact, Tychem® LV has been
tested against more than 200 chemicals, including the ones
most involved in industrial or HazMat incidents. Lakeland
Chemical protective clothing is known for offering excellent
protection and value. Tychem® LV is another fine example. It
offers the tear, puncture and abrasion resistance you
deserve. Superior protection does not come at the expense of
comfort. Tychem® LV garments are soft and lightweight,
allowing workers to move with ease. Tychem® LV is ideal for
a variety of work environments. Tychem® LV is green for low
visibility.
Note: nt = not tested
All test data supplied by The
DuPont Co., Inc. SUper Safety is an authorized Lake
Industries Distributor all images are property of Lakeland
Industries and are protected. Garments made of Tyvek® or Tychem® fabrics
should have slip-resistant or antislip materials on the
outer surface of boots, shoecovers, or other garment
surfaces in conditions where slipping could occur. Item is
not skid resistant. Attached boots should be worn inside own
shoes or boots. Shown above for illustration purposes only.
Warning: Tychem® should not
be used around heat, flames, sparks or in potentially
flammable or explosive environments. |
 |
 |
 |
Coverall,
Style LV130
Tychem® LV
coverall, elastic
face, wrists and ankles. |
Coverall,
Style LV150
Tychem® LV
coverall, hood, elastic face, elastic wrists, attached
boots |
Coverall,
Style LV151
Tychem® LV
coverall, respirator fit hood, elastic face and wrists,
attached boots. |
|
Sizes: S -
5X |
Sizes: S -
5X |
Sizes: S -
5X |
|
Case
Pack 6 |
Case
Pack 6 |
Case
Pack 6 |
|
Case
Weight 8 lbs. |
Case
Weight 8 lbs. |
Case
Weight 8 lbs. |
Please note we suggest the Tychem
Style LV165 as it has a storm flap is similar to the LV151 for
more protection.
 |
Class III
Ensembles
Class III ensembles offer
the lowest level of protection. They are intended for
use well after the release has occurred or in the
peripheral zone of the release scene for such functions
as decontamination, patient care, crowd control, and
clean-up. Class 3 ensembles should only be used when
there is no potential for vapor or gas exposure and
exposure to liquids is expected to be incidental through
contact with contaminated surfaces. Class 3 ensembles
must cover the individual and it is preferred that this
clothing also cover the wearer’s respirator to limit its
potential for contamination. Because these ensembles are
intended for longer wearing periods, the use of
air-purifying respirators with these suits is likely. |
NFPA 1994
Class III Ensemble, Style LV980
Coverall with collar,
zipper, double storm flap with Velcro®, sock boots with
boot flaps, glove ring and clamp assembly with attached
3-layer glove system, North Silvershield® (inner) Viton®
(middle) Knit Kevlar® (outer) gloves. Includes separate
bib-style hood with 10 mil Teflon® outer/40 mil PVC
inner lens, wide-vision lens system, 1” adjustable waist
belt. Also available in Tychem BR -
Style No BR980. |
|
Sizes: S -
5X |
|
Case
Pack 1 |
|
Case
Weight 10 lbs. |
|
Must be worn with NFPA
certified Boots |
|
Call
for Quote!
