AIR-PURIFYING RESPIRATORS [BACK]  [NEXT]

Flexi-Filter® Pads for Advantage Respirators

These low-profile, flexible pads fit well under a welding hood and with other personal protective equipment. They offer great balance and weight distribution for maintaining a good face seal, while their swept-back design provides improved vision and comfort.

 

MSA Filter Description
Flexi-Filter P100

Part No.

818342

Flexi-Filter P100 w/Nuisance Level OV, Ozone Removal 818343
Flexi-Filter P100 w/Nuisance Level AG, HF Removal 818344
Flexi-Filter N95 818346
Flexi-Filter N95 w/Nuisance Level OV Removal 818347
Flexi-Filter P95 818354
Flexi-Filter P95 w/Nuisance Level OV Removal 818355
Flexi-Filter P95  HF Removal (NIOSH)  NEW! 10063227

Notes

1. Do not use in atmospheres containing less than 19.5 percent oxygen,in atmospheres containing gases or vapors or in atmospheres immediately dangerous to life and health.

2. Do not use in atmospheres containing less than 19.5 percent oxygen,or in atmospheres immediately dangerous to life and health.

3. Do notwear for protection against organic vapors with poor warning properties or those which generate high heats of reaction with the sorbent material in the cartridge.

4. 99.97 percent efficient against 0.3 micron DOP.

 

 

 

                                                         Flexi-Filter HF filter

Advantage® 1000 Respirators

The Advantage 1000 Full-Face Respirator features a wraparound flexible lens that offers excellent fit and comfort with increased vision. It weighs 40% less than conventional full-face respirators and uses the same cartridges as the Advantage Family Respirators†.

The Advantage 1000 Respirator is constructed of super-soft Hycar™ rubber that provides the feel and comfort of silicone but has better permeation resistance. The facepiece, which is available in three sizes, has a unique inturned lip seal that provides an exceptional seal against a wide range of facial contours. The Advantage 1000 facepiece also features a distinctive, flexible urethane lens that is integrally bonded to the facepiece, eliminating the need for rigid lens retainers that can cause unwanted pressure points. Standard equipment includes a speaking diaphragm, for clear, short-range communications, and a nosecup, to reduce lens fogging in low temperatures or high-humidity conditions. For more complete information, see Data Sheet 1000-05.

 

Advantage 1000 Facepieces
  Small Medium Large
Black, with speaking diaphragm and nosecup 805414 805406 805420

Advantage 1000 Respirator Accessories                
Flexible Cover Lens for Advantage1000                      

 Protects the facepiece lens from scratches during
storage, handling, and use.

Advantage 1000 Cover Lens, Clear, box of 25

813832

Lens Shield for Advantage 1000
For added impact protection, a polycarbonate lens shield snaps into place. For nuclear personnel, the lens shield provides an additional level of eye protection and increased beta-radiation protection.

Clear Lens Shield, small 806463
Clear Lens Shield, medium/large 806462
Tinted Lens Shield, small 806465
Tinted Lens Shield, medium/large 806464

ESP® II Communication System
A one-piece, self-contained electronic speech projection device that allows wearers to speak normally, yet be heard loud and clear. Also fits Millennium Gas Mask.

ESP II Communication System
for Advantage 1000 and Millennium Masks
10026265

Fax: (773) 538-8080

Telephone: (800) 275-8239                        Website: www.supersafety.com     page 11