HEAD, EYE AND FACE PROTECTION [BACK]  [NEXT]

Skullgard® Protective Caps and Hats

Skullgard Caps and Hats feature heavy-duty construction for use in steel mills and other heavy industries where elevated temperatures are common. Skullgard Caps and Hats meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003,Class G (electrical—low voltage).

  

Complete Assemblies

                                                   Skullgard Cap                                                      Skullgard Hat

Color  

Staz-On Susp.  

Fas-Trac Susp.  

Swing-Ratchet Susp.  

Staz-On Susp.  

Fas-Trac Susp.

Natural tan  

454617  

475395  

816651  

454664  

475407

White  

454618  

475396  

•  

454665  

475408

Yellow  

454619  

475397  

•  

454666  

•

Red  

454620  

•  

•  

•  

•

Green  

454621  

•  

•  

454668  

•

Grey  

454622  

•  

•  

•  

•

Blue  

454623  

•  

•  

•  

•

Orange  

454626  

•  

•  

454673  

•

Alternative Complete Assemblies

Large Skullgard Cap with Staz-On suspension, natural tan  

82018

Standard Skullgard Cap with Staz-On suspension, lamp bracket and cord holder, natural tan  

460409

Skullgard Hat with Staz-On suspension,lamp bracket and cord holder, natural tan  

460389

Skullgard Cap with Fas-Trac suspension, Welder’s Lugs, natural tan  

482002

Replacement Suspensions

 

Size  

Staz-On  

Suspension  

Fas-Trac Ratchet  

Suspension  

Fixed-Crown® Swing  

Suspension  

Fas-Trac  

Suspension  

1-Touch

Suspension

Standard (6˝–8)  

454231  

473334 (6˝–7 5/8)  

79717 (6˝ –7 5/8)  

816654  

10061128

Large (7–8˝)  

468096  

478454  

—  

—  

—
 

Topgard® HTE Protective Caps

Lightweight, durable Topgard  HTE slotted Caps are built for use by industries where elevated temperature, Class E head protection is necessary. Limited resistance to top impact or penetration is retained through a wide range of temperatures. Topgard HTE Caps meet or exceed the applicable

requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003, CSA Z94.1-2005, Class E

(electrical—high voltage) and NFPA 70E. Topgard HTE Caps are not specifically designed to

protect against lateral blows from the front, side or rear. MSA’s Vanguard Type II protective helmets are so designed and must be used if lateral protection is desired. For more information, contact your local MSA distributor.

For Cap Accessories, see pp. 118–122.

White  

Yellow  

Red  

Blue  

Orange

Fas-Trac Suspension   10074921  

10074922  

10074910  

10074909  

10074908

Replacement Suspension

Standard Size Fas-Trac Suspension (61/2–8) for Topgard Cap or Hat  

473333

Defender + Faceshield Frames for Slotted Caps (Less Visor)

Defender + Faceshield Frame for Topgard Caps with lockdown clip  

10021615

Defender + Faceshield Frame, elevated temperature (polycarbonate) (replaces Tempgard)  

10031191

Arc Shield Visor For protection from electric arcing. Call for protection level. Meets ANSI Z87 and NFPA 70E, Class 2.

Color  

Material  

Size (inches)  

Part No.

Tinted (light green/brown) – HIGH IMPACT, 10 Cal  

propionate  

10 x 20 x .060  

10006024

Tinted (light green/brown) complete w/chinguard, 14 Cal – basic Z87.1  

propionate  

6 x 20 x .060  

 10063107
 

 

 

 

 

 

Comfo-Cap® Protective Headwear

Designed for work in low-ceiling areas

The Comfo-Cap Protective Cap is widely used in

the mining industry for head protection. The cap

has a low-crown clearance for work in low-ceiling

areas and is equipped with a lamp bracket and

cordholder to support a miner’s lamp.

Made of lightweight, tough polycarbonate plastic,

the shell helps resist top impacts. Molded cross

ridges on the crown provide increased strength

and rigidity. The cap’s peak helps protect the

wearer’s eyes and face from small falling objects

Note: The Comfo Cap is not specifically designed

to protect against lateral blows from the front,

side or rear .MSA’s lateral protective helmets are

so designed and must be used if lateral protection

is desired. For more information, contact your

MSA distributor.

Comfo-Cap Protective Headwear meets or

exceeds the applicable requirements for a Type I

helmet (top impact) as outlined in ANSI Z89.1-

2003,Class G (electrical–low voltage).

  

Comfo Cap Assemblies

Color  

White  

Blue  

Yellow  

Orange  

Red  

Green  

Black

Staz-On Suspension  

91522  

91586  

91585  

91589  

91590  

91584  

82769

Fas-Trac Suspension  

475336  

—  

—  

—  

—  

—  

—

Replacement Suspensions

Description  

Part No.

Staz-On Suspension (6˝– 8)  

454231

Fas-Trac Suspension (6˝ – 8)  

473334

1-Touch Suspension (6˝ – 8)  

10061128
 

Attachments

Description  

Part No.

Lamp Bracket (for all MSA helmets), must be screwed on (Class C)  

15244

Cord Holder (for all MSA helmets),must be screwed on (Class C)  

85277

Chinstrap—attaches to suspension  

81329

Fax: (773) 538-8080

 Telephone: (800) 275-8239                        Website: www.supersafety.com     page115