FALL PROTECTION [BACK]  [NEXT]

BODY BELTS

MSA lightweight body belts are used for travel restriction or work positioning). Body belts are available in nylon or polyester webbing. Unique single pass friction buckles allow for a wide range of waist adjustment while tongue buckles adjust to a specific waist size. A 3 or 4 inch wide body pad is available on most models for additional comfort while work positioning. D-rings are available on the back of the belt for travel restriction and on the hips for work positioning. Multi-purpose body belts include a 3-inch wide body pad and seat strap which provides for additional comfort while work positioning for long periods of time.

Part No.    Description & Size

415275  

Nylon, tongue buckle, 3" body pad, 2 fixed D-rings, size Large

415276  

size Medium

415289  

Nylon, tongue buckle, 3" body pad, 1 fixed D-ring, size Large

415290  

size Medium

 

SHOCK ABSORBING LANYARDS

Energy absorbing lanyards are a component of a personal fall arrest system. They provide a means of connection between the back (dorsal) D-ring of MSA full body harnesses and a qualified anchorage and anchorage connector. The energy absorber keeps fall arrest forces below ANSI and OSHA limits and deceleration distance is controlled to a maximum of 42 inches. The lanyard is available in strap, rope, and wire rope configurations with a variety of snaphooks.

"NO METAL ABOVE THE WAIST" SHOCK ABSORBING LANYARD

The "No Metal Above the Waist" shock absorbing lanyard was specifically designed to work in conjunction with the "No Metal Above the Waist" harness, which was designed for the utility industry worker. To maintain the "No Metal Above the Waist" configuration, this shock absorbing lanyard has a 9" sewn loop on one end which attaches to the back (dorsal) attachment point on the "No Metal Above the Waist" harness.

“No Metal Above the Waist” Shock Absorbing Lanyard,
with Dyna-Brake, polyester 1” strap, fixed 6’ length

Part No.  

Harness Connection  

Anchorage Connection

501580  

Sewn Loop  

RL20

 

 

TIE-BACK™ SHOCK ABSORBING LANYARD

The integral adjustable D-ring of the MSA Tie-Back lanyard allows for a compatible means of

connection, minimizes the potential for roll-out, and eliminates the necessity of a separate anchorage connector. The integral adjustable D-ring allows the MSA Tie-Back Lanyard to accommodate a wide variety of anchorage point shapes and sizes.

The MSA Tie-Back Lanyard features:

• Integral Dyna-Might shock absorber or Dyna-Brake shock absorber

• Available in Twin-Leg configuration for 100% tie-off

• Maximum arrest force of 900 lbf

• Meets ANSI A10.14, ANSI Z359.1, and all applicable OSHA standards

10021670  

X  

Dyna-Brake  

HL2000  

HL2000

10021671  

X  

Dyna-Brake  

HL2000  

(2) HL2000  

X

10021673  

X  

Dyna-Brake  

HL2000  

(2) HL64  

X

10011792  

X  

Dyna-Might  

HL2000  

HL2000

10011649  

X  

Dyna-Brake  

RL20  

(2) RL20  

X

 

 

Fax:(773) 538-8080

Telephone: (800) 275-8239                        Website: www.supersafety.com     page 147