FALL PROTECTION [BACK]  [NEXT]

CONFINED SPACE EQUIPMENT

MSA confined space entry/retrieval systems are designed for fall arrest, lifting and lowering,

rescue, and work positioning applications. They incorporate an anchorage connector, fall arrest

component (Dyna-Lock, Dynevac II, Lynx Rescuer), a personnel and materials handling hoist

(Lynx Hoist) and associated hardware to rig the system for use. The systems can be used for

leading edge work, maintenance and entry/retrieval from manholes, tank cars, silos, tanks,

vaults, pits, vats and other confined space applications.

LYNX™ RESCUER, FIELD RESETTABLE MODEL WITH LOCKOUT

• Self Retracting Lanyard with emergency retrieval capabilities

• User is able to reset device from retrieval mode to fall arrest mode

• The easiest, quickest field-reset mechanism on the market

• Same unit can be used in the field and for training situations

• Lock feature with key allows more control over who can reset unit to fall arrest mode

• Confined space entry provides fall arrest and emergency lifting and lowering

• Meets ANSI A10.14, ANSI Z359.1, and all applicable OSHA standards, and is CSA certified

Part No.  

CSA Part No.  

Description

10011744  

10023016  

50 ft (16m) Self Retracting Lanyard with Emergency Rescuer, 3/16" diameter stainless steel line. With proper inspection, system may be reused after fall arrest and/or retrieval.

10011745  

10023017  

95 ft (30m) Self Retracting Lanyard with Emergency Rescuer, 3/16" diameter stainless steel line. With proper inspection, system may be reused after fall arrest and/or retrieval.

LYNX™ PERSONNEL/MATERIAL HOIST

• Designed for lifting, lowering, and positioning of personnel and materials

• Maximum work load of 310 lbs for personnel and 620 lbs for materials

• Anti-backlash crank handle with a lifting/lowering speed of 25 ft per minute

• Integral shock absorber

• Load-limiting clutch prevents overloading of hoist

• Emergency drive allows manual bypass of load-limiting clutch

for extra lifting capacity in an emergency

• Primary gear backed up by two independent secondary brakes

• Air drive adapter enables powered lifting/lowering with optional

air-powered drive assembly

• Meets ANSI A10.14, ANSI Z359.1, and all applicable OSHA standards

Part No.  

Description

10016569  

Side mount with emergency drive and air drive adapter, galvanized wire rope, 50’

10016568  

105’length wire rope

10016683  

Boom mount with emergency drive and air drive adapter, galvanized wire rope, 50’

10016682  

105’ length wire rope

 

Fax: (773) 538-8080

 Telephone: (800) 275-8239                        Website: www.supersafety.com     page 162